Overview
The Hedman Hedder bolt kit, part HED09006, is a 16 piece header bolt kit in 5/16 in. -18 x 1 in. size with a zinc plated finish. It is universal fit, so it is not tied to a specific engine or vehicle.
Key features
- 16 pieces in one kit
- Zinc plated finish
- 5/16 in. -18 x 1 in. bolt size
- Universal fit listed by Hedman
Header bolt care and reuse
Header bolts work in a harsh spot. They face repeated heating and cooling, and the threads can seize, stretch or corrode over time. Because the header flange is clamped by these bolts, a loose or stretched fastener can let exhaust leak at the joint, which often shows up as a ticking noise when the engine is cold.
Before reusing any header bolts, inspect each one for straightness, thread damage and stretching. Fasteners that show heavy corrosion are usually better replaced. Tighten in a staggered pattern and recheck the bolts after the engine has warmed and cooled a few times, since heat cycling can slacken them.
- Replace bolts that show stretching or thread damage
- Check the flange for warping before refitting
- Use fresh gaskets whenever the header is removed
Specifications
| Brand | Hedman |
|---|---|
| Part number | HED09006 |
| Thread size | 5/16 in. -18 |
| Length | 1 in. |
| Finish | Zinc plated |
| Pieces | 16 pc. |
| Fitment | Universal Fit |
Vehicle fitment
Universal fit is listed, and no engine, header or vehicle is named.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 5/16 in. -18 thread and 1 in. length against your header flange before fitting the bolts.
What’s included
The kit contains 16 pc. of zinc plated header bolt hardware. Check gasket and nut needs against your header before starting.









