Overview
The Hawk Performance HB514F.610 is a rear HPS Performance Street disc brake pad for the 2003 and 2006–2007 Dodge Ram 1500. It has a 0.610 thickness rating and is a direct-fit upgrade pad.
Hawk says its disc brake pads are designed as direct replacements for factory and aftermarket pads, using specialty compounds intended to give strong braking with minimal noise and dust.
Key features
- HPS Performance Street compound
- Rear-axle pad set
- Direct fit
- Upgrade-type pad
- Specialty compounds designed for low noise and dust.
Pad break-in and wear
Brake pads wear as they convert motion into heat, and rear pads often wear more slowly than the fronts on a light truck. Look at the wear indicator or measure the friction material when the pads are removed, and replace them in axle pairs so braking stays even from side to side. Uneven pad wear usually points to a sticking caliper slide or a seized piston rather than the pads themselves.
New pads need a proper bed-in process to transfer an even layer of friction material onto the rotors. Follow a gradual series of moderate stops before any hard braking, and let the brakes cool between runs. Check the rotors for grooves, heat spots or a pulsing pedal, since a worn rotor can cause noise and reduced braking response even with fresh pads.
- Replace pads in axle pairs
- Check caliper slides when wear is uneven
- Bed in new pads with moderate stops
Specifications
| Brand | Hawk Performance |
|---|---|
| Part number | HB514F.610 |
| Compound | HPS Performance Street |
| Thickness | 0.610 |
| Position | Rear |
| Fitment type | Direct fit |
| Type | Upgrade |
Vehicle fitment
It fits the Dodge Ram 1500 in model years 2003 and 2006–2007.
It fits the 2003 and 2006–2007 model years. Rear axle only; front brakes are not covered. Confirm the year, model and trim against your truck before ordering.









