Overview
The Power Stop 16-843 is a front Z16 Evolution Scorched ceramic brake pad set for the 2001–2007 Ford Escape and the Mazda Tribute.
Z16 Evolution pads are made to OEM specifications, with the same chamfers and slots found on factory pads. Power Stop adds a ceramic formula that keeps dust down and shims with two rubber layers over constrained steel, so the pads are designed to run quietly right after the scorched surface beds in.
Key features
- True ceramic compound intended to keep wheels cleaner
- Scorched surface shortens the bed-in period
- OE-style positive mold manufacturing
- Noise-damping shims with rubber over steel layers
- Built under TS16949 standards
- Fits the stock caliper as a direct replacement
Front pads on compact crossovers
Front pads on a compact crossover handle most of the braking, especially in town traffic where stops are frequent. Wear builds up faster than on the rear axle, so front pads are often the first brake part to need replacing on these vehicles.
Ceramic friction compounds leave less dust on the wheels and are generally quiet in use. Thermal scorching shortens the bed-in period, and the chamfers and slots help control noise on the pad edges. Shims with rubber layers over steel reduce vibration reaching the pedal.
When changing pads, check the rotor thickness and surface, clean the caliper bracket, and lubricate the slide pins with a suitable brake grease. Replace worn hardware clips and check the brake fluid level, since a low reservoir can signal a leak.
- Check pad thickness on both front wheels
- Inspect rotors for scoring or blue spots
- Look for leaks at the caliper and hose
Specifications
| Brand | Power Stop |
|---|---|
| Part number | 16-843 |
| UPC | 792088515032 |
| Product line | Z16 Evolution Scorched brake pads |
| Pad material | Ceramic |
| Position | Front |
| Caliper | Stock |
| Fit type | Direct fit |
| Type | Upgrade |
| Surface treatment | Thermal scorched |
| Dust level | Low dust |
| Shims | Dual rubber layers over constrained steel |
| Manufacturing | Positive mold technology, TS16949, OEM specifications with chamfers and slots |
Vehicle fitment
The 16-843 fits the 2001–2007 Ford Escape and the 2001–2006 and 2008 Mazda Tribute. It is a front pad set only.
The 2007 Mazda Tribute is not on Power Stop’s list for this pad, even though neighboring years are. These are front pads only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front pads in set 16-843 arrive with thermally scorched faces, which Power Stop designed for a fast break-in, so expect the pads to settle in quickly on the first drives.









