Overview
The H3R Performance H3RBMR10P is a polished quick-release billet bracket for mounting a fire extinguisher. It offers flat surface and roll bar mount options, and each uses its own band clamp.
Clamp and mount come as a matched pair, so select the band clamp size before the mount style.
Key features
- Polished finish
- Quick-release billet construction
- Flat surface and roll bar mount options
- Band clamps for 1.0, 1.4 and 2.5 lb. extinguishers
- Universal fit listed
Matching clamp and mount
A flat surface mount and a roll bar mount use the bracket differently, so the mounting spot decides the setup before anything is bolted down. Flat surface installs fasten to a level panel or plate, while roll bar installs clamp around a tube. Check the surface for clearance around the extinguisher and make sure the bracket sits where the release can be reached quickly.
Band clamps are sized to the extinguisher, so a 2.5 lb. unit needs a different clamp from a 1.0 lb. unit even when the bracket looks the same. Replace a clamp that has stretched, cracked or lost its grip, and keep the bolts snug so the bracket cannot rotate on the tube. Tubing that is dented or flattened may not hold a clamp well, so inspect it before mounting.
- Confirm the extinguisher size before selecting the clamp
- Check the mounting surface for clearance around the release
- Tighten band clamp bolts and recheck them after rough driving
Specifications
| Brand | H3R Performance |
|---|---|
| Part number | H3RBMR10P |
| Finish | Polished |
| Mount category | Extinguisher mount |
| Compatible band clamp sizes | 1.0 lb., 1.4 lb. and 2.5 lb. (depends on mount style) |
Vehicle fitment
It is a universal fit bracket, so no make, model or year applies. Confirm the mount style and tubing size for your roll bar before choosing a mount.
Verify fit against your vehicle’s year, model and trim before you order. Check the mounting surface on your vehicle before choosing a flat surface or roll bar mount.
Installation notes
Choose the band clamp size for your extinguisher first. Flat surface mounts and dual clamp roll bar mounts take the 2.5 lb. clamps, while the 1.0 and 1.4 lb. clamps go with flat surface and single clamp roll bar mounts.
What’s included
Hardware and clamps are not included with the bracket.
Not included: the fire extinguisher and the band clamps, which are needed separately.









