Overview
The H3R Performance BB100P is a polished band clamp for 1.0 lb and 1.4 lb fire extinguishers. The title gives the range as 1 to 1.4 lb, and the clamp is labeled universal fit.
The clamp is used with a flat surface mount or a single clamp roll bar mount. H3R says clamps and mounts must be used together, so pick the clamp size first and then the mount.
Key features
- Polished finish
- For 1.0 lb and 1.4 lb fire extinguishers
- Pairs with flat surface mounts and single clamp roll bar mounts
- Part of H3R’s quick-release billet mounting range
- H3R says its brackets are accepted by most race-sanctioning bodies and clubs
Clamp and mount pairing
A band clamp is the part that actually holds the extinguisher, so its size decides which mount can go with it. Start by confirming the extinguisher’s weight, then choose the clamp, and only after that pick a flat surface or single clamp roll bar mount. Mixing sizes can leave the extinguisher loose or stress the clamp.
Once installed, check that the clamp grips the cylinder evenly and that the mount has no movement under hand pressure. Vibration can loosen clamps over time, so retighten after the first few runs and inspect the band for stretching, rust or cracking. Replace any clamp that no longer holds the extinguisher firmly.
- Confirm extinguisher weight first
- Match the mount to the clamp
- Retighten after early use
Specifications
| Brand | H3R Performance |
|---|---|
| Part number | BB100P |
| UPC | Not listed |
| Finish | Polished |
| Fits | 1.0 lb and 1.4 lb fire extinguishers |
| Use | Band clamp with flat surface or single clamp roll bar mount |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and attaches to a flat surface mount or a single clamp roll bar mount. The mount you choose decides where it can go.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose the band clamp size for your extinguisher first, then add a flat surface or single clamp roll bar mount, since the two must be used together.
What’s included
Confirm you have a flat surface or single clamp roll bar mount on hand before starting.
