Overview
The H3R Performance BMR12B is a brushed dual clamp roll bar mount for 1-3/4 inch roll bars. It combines with band clamps for 2.5 lb fire extinguishers, and H3R describes its quick-release billet design as accepted by most race-sanctioning bodies and clubs.
Select the band clamp size before choosing between a flat surface mount and a roll bar mount, since the parts are meant to be paired.
Key features
- Dual clamp roll bar mount
- Fits 1-3/4 inch roll bars
- Brushed finish
- Quick-release billet design
- Works with band clamps for 2.5 lb fire extinguishers
- Accepted by most race-sanctioning bodies and clubs, per H3R
Pairing mounts and clamps
A dual clamp mount grips the roll bar at two points, which spreads the load and keeps the extinguisher steady on rough terrain. The mount and band clamp work as a pair, so confirm both are the right size before you buy either one. Quick release designs are convenient, but they still need to lock firmly, so test the latch with the bottle loaded before every trip.
Billet parts are solid and resist bending, yet the bolts and clamp hardware can loosen under vibration. Check fasteners after the first few runs and before each event, and tighten them to the level the fastener requires. Replace any clamp with a cracked or worn lip. Keep the brushed finish clean and dry, and store a spare set of clamp hardware in the vehicle so a lost bolt does not leave the bottle unsecured.
Specifications
| Brand | H3R Performance |
|---|---|
| Part number | BMR12B |
| UPC | Not listed |
| Mount type | Dual clamp roll bar mount |
| Roll bar size | 1-3/4 inch |
| Finish | Brushed |
| Material | Billet |
| Pairs with | Band clamps for 2.5 lb fire extinguishers |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit roll bar accessory sized for a 1-3/4 inch roll bar, not a vehicle-specific part. Measure the roll bar before buying, and verify the year, model and trim fit your build.
Measure your roll bar before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Select the band clamp for your extinguisher size before fitting this mount, because the clamp is what holds the extinguisher.
What’s included
The mount is the item supplied. Compare the arriving parts with your install plan before starting, since band clamps and extinguishers are needed for use.
