Overview
The Gorilla Whips replacement flag is a flag for a standard LED light whip. It is sewn to fit a 3/4 inch diameter pole, and the package also includes a black end cap and 2 grommets that fit the same pole.
Owners replacing the flag on a standard LED light whip can use this part as a direct swap. Gorilla Whips names no vehicles for this accessory.
Choosing a replacement flag
A light whip flag takes a steady beating. It flaps in wind, rubs against the pole, and catches on brush and low branches on the trail. Over time the stitching at the pole sleeve is usually the first place to show wear, and faded or frayed fabric becomes harder to see in traffic. Replacing only the flag is a quick job compared with replacing the whip, which is why many owners keep a spare on hand.
When choosing a replacement, match the pole diameter first, then check the end cap and grommets against your existing hardware. If the old flag is still on the pole, note how it is attached before removing it so the new one lines up the same way. A flag that sits off-center or bunches at the top can make the whip droop, so check alignment after the first few drives.
- Measure the pole diameter before buying
- Compare grommet positions with the old flag
- Look for dents or rough spots on the pole that snag fabric
- Replace the end cap if it is cracked or loose
Specifications
| Brand | Gorilla Whips |
|---|---|
| Compatible with | Standard LED light whip |
| Pole diameter | 3/4 inch |
| Accessory type | Replacement flag |
Vehicle fitment
It is designed for standard LED light whips with a 3/4 inch diameter pole. Check the pole size on your whip before installing.
What’s included
- 1 replacement flag sewn to fit a 3/4 inch diameter pole
- 1 black end cap for a 3/4 inch diameter pole
- 2 grommets that fit a 3/4 inch pole
Not included: the LED light whip itself.







