Overview
The G2 Axle and Gear 91-2011C is a Ford 9 inch pinion support in the Daytona style, made of heavy duty cast nodular iron. It is machined for a larger inner pinion bearing and is made for the rear housing of a Ford 9 inch axle.
The support is made for the rear Ford 9 inch housing. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Heavy duty cast nodular iron
- Machined for a larger inner pinion bearing
- No pinion snubber landing
- Available in multiple bearing options
Pinion support and bearing setup
The pinion support holds the forward end of the pinion shaft and keeps the gear mesh steady under load. Its bearing bore and the carrier setup work together, so the support is usually fitted after the carrier is adjusted. A worn bearing or a loose support can show up as whine, rough gear contact or metal in the gear oil.
Pinion supports are often replaced with the pinion bearings and crush sleeve when a gear set is rebuilt. Keep the old parts for comparison, and inspect the housing bore for scoring before fitting a new support. Check the bearing option you select against the rest of the setup so the preload matches the rebuild.
- Check the housing bore for scoring
- Replace bearings with the support
- Confirm gear mesh after installation
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 91-2011C |
| UPC | 631410096651 |
| Material | Nodular iron |
| Axle type | Ford 9 inch |
| Housing type | Rear |
Vehicle fitment
The rear Ford 9 inch housing is the housing type it is made for. Verify your housing type before ordering.
Front housings are not the type named here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A pinion support is set during a gear and pinion install, and bearing preload and gear setup are best handled by a professional with the carrier out.
What’s included
Check the package contents against your installation before starting.









