Overview
The FUEL Off-Road Sledge D595 20 x 10 inch wheel is an aluminum split spoke wheel in gloss black milled, catalogued as part number MHTD59520002647. Its listed bolt patterns are 5 on 4.5 / 5 on 5 and 5 on 4.5/114.3.
The offset is -18, a negative value that moves the mounting face outward compared with a positive offset wheel of the same width. The center bore is 78 and the backspacing is 4.8, so confirm these against your hub and clearances.
Key features
- Split spoke design with a gloss black milled finish
- Aluminum construction
- 20 inch diameter and 10 inch width
- Two bolt pattern entries: 5 on 4.5 / 5 on 5 and 5 on 4.5/114.3
- Offset -18 and center bore 78
Negative offset and clearance
A negative offset pushes the mounting face outward, which moves the wheel toward the fender and the outer edge of the suspension. That position can widen the track and bring the tire closer to the fender lip, so fender liners, flares and steering stops are worth checking before the vehicle is driven hard.
Off-road use adds load from rocks, ruts and articulation. Wheels with a strong outward offset increase leverage on the bearings and studs, so hub and bearing condition matter. After mounting, turn the steering lock to lock and drive over uneven ground slowly to see whether anything rubs.
- Fender liner and flare clearance
- Steering stop and tie rod clearance
- Bearing and hub condition
- Rub check at full lock and full compression
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD59520002647 |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Offset | -18 |
| Center bore | 78 |
| Backspacing | 4.8 |
| Style | Split Spoke |
| Finish | Gloss Black Milled |
| Bolt pattern | 5 on 4.5 / 5 on 5 |
| Second bolt pattern | 5 on 4.5/114.3 |
| Construction | Aluminum |
Vehicle fitment
No vehicle is named for this wheel, and the universal fit label does not match it to any make, model or year.
Compare the 5 on 4.5 / 5 on 5 pattern and the -18 offset with your own vehicle’s measurements; no close models are named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A negative offset can change suspension and fender clearance, so test fit with the tire you plan to run before driving. Verify the bolt pattern and center bore against the hub first; a mismatch can leave the wheel off-center and loose.
What’s included
One wheel is included. No accessories come with it.
Not included: tires and lug hardware.









