Overview
The FUEL Off-Road Maverick 20×8.25 wheel, part number MHTD538208292F, is a 20 Inch aluminum wheel with an 8.25 Inch width and an 8 on 200 bolt pattern. Its black milled finish, 122 offset and 9.41 backspacing are the measurements to compare against your truck’s hub and wheel well.
The wheel is listed in the Dually style. No vehicles are named for it, so the bolt pattern, offset and backspacing are the figures to check before choosing it.
Key features
- Black milled finish
- Aluminum construction
- 20 Inch diameter and 8.25 Inch width
- 8 on 200 bolt pattern
- Offset of 122 and backspacing of 9.41
- Dually style
Dually spacing and clearance
Dually setups place two wheels side by side on each axle, so the inner wheel and tire leave little room. Offset and backspacing decide how close the inner wheel sits to the frame, brake parts and suspension. Test the clearance with both wheels mounted, then turn the steering to full lock and check for rub. Any change in tire width or valve stem position can reduce the gap, so retest after tire changes.
Milled black finishes hold up well to road use, but brake dust and road salt can build up in the milled grooves. Clean the milled areas with a soft brush to keep them looking sharp. Check the valve stems, lug nuts and hub seating after the first drive, since dually wheels carry heavy loads and any looseness is worth catching early. Inspect the lip after curb contact, because bent edges can affect the tire seal.
- Test both inner and outer wheel clearance
- Check valve stem placement
- Clean milled grooves with a soft brush
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD538208292F |
| Model line | Maverick |
| Wheel diameter | 20 Inches |
| Wheel width | 8.25 Inches |
| Bolt pattern | 8 on 200 |
| Offset | 122 |
| Backspacing | 9.41 |
| Style | Dually |
| Finish | Black, milled |
| Construction | Aluminum |
Vehicle fitment
This is a universal fit wheel, so no specific vehicle is matched to it. Check the 8 on 200 pattern against your truck’s hub before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit one wheel for brake and suspension clearance at the 122 offset before mounting a full set. Plan on lug nuts, center caps and valve stems that match your setup.
What’s included
This is one wheel. Plan to buy a tire, lug nuts and center caps as your setup needs them.









