Overview
The FUEL Off-Road Sledge D596 20 x 9 inch wheel is an aluminum split spoke design with a matte black finish. The title also names a gloss black lip. Part number MHTD59620905263 identifies it, and the listed bolt pattern is 5 on 4.5/5 on 120.
The offset is 35, a positive value that places the mounting face further inward than a negative offset wheel would. Backspacing is 6.4. Measure the hub bore on your vehicle before choosing this wheel.
Key features
- Split spoke design in matte black
- Gloss black lip
- Aluminum construction
- 20 inch diameter and 9 inch width
- Offset 35 and backspacing 6.4
Matte finish and lip care
Matte black finishes hide small scratches better than gloss, but they can show polish marks and stains when rubbed with the wrong products. Clean with a soft brush, mild soap and plenty of water, then dry with a clean towel. Avoid solvent-based cleaners, which can leave a shine that does not match the rest of the wheel.
A contrasting lip adds edge protection, but the lip is also where curb strikes land. Inspect it for bends or cracks after hard impacts. Positive offset tucks the wheel inward, so check caliper and suspension clearance the same way you would for any wheel that sits deeper in the wheel well.
- Soft brush and mild soap for matte surfaces
- Avoid solvent-based cleaners
- Check the lip after curb strikes
- Recheck caliper clearance with positive offset
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD59620905263 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Offset | 35 |
| Backspacing | 6.4 |
| Style | Split Spoke |
| Finish | Matte Black |
| Bolt pattern | 5 on 4.5 / 5 on 120 |
| Construction | Aluminum |
Vehicle fitment
No make, model or year is matched to this wheel, so fit depends on your hub and clearances.
Compare the 5 on 4.5 and 5 on 120 pattern with your hub before choosing this wheel, and check offset 35 for clearance. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With no center bore listed, confirm hub compatibility before mounting. Test fit with a tire on the wheel to check that the offset clears the brake caliper.
What’s included
Only the wheel is included, with no tire or lug hardware.
Not included: tires and lug hardware.









