Overview
The FUEL Off-Road Assault D546 is a 20 x 10-inch aluminum mesh-style wheel, part number D54620001847, with an 8 on 180 bolt pattern and 124 center bore. The offset is -18 and the backspacing 4.8. The finish is black with milled accents, and the manufacturer classes the wheel as universal fit.
The 8 on 180 pattern is a single bolt-pattern entry rather than two forms, which keeps the hub check simple. The 124 center bore needs to be checked against your hub’s diameter, and a bore larger than the hub calls for hub-centric rings. Offset and backspacing come next, once the mounting face is confirmed.
Key features
- Mesh spoke style
- Aluminum construction
- 20-inch diameter and 10-inch width
- 8 on 180 bolt pattern with a 124 center bore
- Offset of -18 and backspacing of 4.8
Hub-centric rings and seating
A 124 center bore is large for many hubs, so hub-centric rings are often used to center the wheel. The ring should fill the gap between the hub and the bore so the lugs only clamp the wheel rather than carry its location. Check that the ring is fully seated before setting the wheel, since a tilted ring can cause vibration.
Seating the wheel flat on the hub matters as much as the center bore. Clean the hub face and the wheel seats before mounting, and remove any rust or paint that could hold the wheel off the hub. Tighten the lugs in a star pattern, then recheck after the first few miles of driving.
- Clean the hub face before mounting
- Use rings sized to the hub
- Retorque after the first drives
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | D54620001847 |
| Style | Mesh |
| Construction | Aluminum |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 8 on 180 |
| Center bore | 124 |
| Offset | -18 |
| Backspacing | 4.8 |
| Finish | Black/Milled |
| Fitment | Universal fit |
Vehicle fitment
This wheel has no named year, make or model. Match the 8 on 180 bolt pattern and 124 center bore to your hub first, then check offset and backspacing for your vehicle.
A negative offset in a 10-inch width can change fender and suspension clearance, so fit must be verified on the vehicle itself.
Installation notes
Confirm the wheel seats flat on the hub with the bore fully over the hub face. Use hub-centric rings if the bore is larger than the hub, and tighten the lug nuts in a star sequence after the first pass.
What’s included
Only the wheel is covered. Lug nuts, center caps and tires are not included, so plan to source them separately.
Not included: tires and wheel hardware.









