Overview
The FUEL Off-Road Rebel 6 D680 is a 22-inch by 12-inch aluminum split spoke wheel with a 6 on 5.5 bolt pattern and part number MHTD68022208447. It comes in an anthracite and black finish and suits trucks and SUVs that use a 6 on 5.5 hub. Bolt pattern, center bore, offset and backspacing should be matched to your hub before mounting.
The wheel has a -44 offset and a 4.8 backspacing. Those two figures control how far the wheel sits outward and how much room remains behind the mounting face, so compare them with the wheels you run now. The D680 model code is part of the model name.
Key features
- Split spoke design
- 22-inch diameter with a 12-inch width
- 6 on 5.5 bolt pattern
- Anthracite and black finish
- Aluminum construction
- Offset of -44 and backspacing of 4.8
- Center bore of 106
Matching the hub bore
A 22-inch wheel with a 12-inch width has a larger mounting footprint than smaller wheels, so hub fit matters more. The 106 center bore has to sit squarely over the hub so the wheel is centered before the lug nuts take the load. A bore that is too small will not seat, while one that is too large relies on the lug nuts alone to center the wheel, which is less stable under load.
Inspect the mounting face and studs before installation for corrosion, burrs or damage. Clean the hub face of rust and debris, then mount the wheel and tighten the lug nuts in a star pattern. Recheck the torque after a short drive, and inspect the wheel for cracks after hard off-road use, especially near the spokes where stress concentrates.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD68022208447 |
| Model | Rebel 6 D680 |
| Diameter | 22 inches |
| Width | 12 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | -44 |
| Center bore | 106 |
| Backspacing | 4.8 |
| Style | Split spoke |
| Finish | Anthracite/Black |
| Construction | Aluminum |
Vehicle fitment
A year, make, model or trim has not been tied to this wheel. Its fit depends on bolt pattern, center bore, offset and backspacing, so match those four measurements to your vehicle’s hub before ordering.
Because the offset is -44 and the backspacing is 4.8, confirm fender, brake and suspension clearance before mounting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 6 on 5.5 bolt pattern and 106 center bore match the hub before the wheel goes on. Confirm the correct lug style for the wheel’s mounting face. Torque lug nuts to the value for your vehicle.
What’s included
Each order covers one wheel with the finish, dimensions and bolt pattern shown above.
Not included: Look over the package contents against your installation before starting, and arrange tires, lug nuts and center caps separately if your setup needs them.











