Overview
The FUEL Off-Road Assault D546 is a 20 by 10 inch aluminum mesh-style wheel, part number D54620008247. It has an 8 on 6.5 bolt pattern, a 125 center bore, an offset of -18 and backspacing of 4.8. The finish is black with milled accents, and the wheel is universal fit.
The 8 on 6.5 pattern is the first measurement to verify on your hub. Once the pattern and the 125 center bore match, offset and backspacing decide whether the wheel clears brake and suspension parts. Because the wheel is not sized to one vehicle, those checks belong to the buyer’s own truck or SUV.
Key features
- Mesh spoke style
- Aluminum construction
- 20-inch diameter and 10-inch width
- 8 on 6.5 bolt pattern with a 125 center bore
- Offset of -18 and backspacing of 4.8
Mesh wheels and hub fit
Mesh-style wheels have open areas that expose more of the brake and hub region, so they collect dust and grit more easily. Clean the inner barrel and hub surfaces after off-road runs, and check that the hub face is free of rust before installation. Hub-centric rings may be needed if the center bore is larger than the hub.
Milled accents can hold dirt in the grooves, so a soft brush helps keep the finish clean. Inspect the lip and bead seat after rough trail use, since a bent lip can cause slow air loss. Check lug torque after the first drives, especially on a 10-inch wide wheel with a fixed offset.
- Clean mesh openings and milled grooves
- Confirm hub-centric fit before mounting
- Check the bead seat after rough trails
- Re-torque lug nuts after initial use
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | D54620008247 |
| Style | Mesh |
| Construction | Aluminum |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | -18 |
| Backspacing | 4.8 |
| Finish | Black/Milled |
| Fitment | Universal fit |
Vehicle fitment
No vehicle year, make or model is named for this wheel. Match the 8 on 6.5 bolt pattern and 125 center bore first, then confirm offset and backspacing against your vehicle before ordering.
Any wheel with a -18 offset at 10 inches wide should be checked for clearance with the actual brake calipers and fender lips before it is driven.
Installation notes
Fit the wheel flat on the hub, then tighten lug nuts in several stages using a star sequence. A center bore larger than your hub needs hub-centric rings, and a hub larger than the bore will not accept the wheel.
What’s included
Tires, center caps and lug nuts should be arranged before mounting.
Not included: tires and lug hardware.









