Overview
The FUEL Off-Road Anza D558 is a 20 x 10-inch aluminum split-spoke wheel with a 5 on 5 bolt pattern, 78 center bore and offset of -18, part number D55820007347. It is universal fit, so fitment depends on hub measurements and clearance rather than a named vehicle. The finish is matte anthracite or gunmetal.
A 20-inch wheel that is 10 inches wide with a -18 offset pushes the face noticeably outward, so inner and outer clearance matter more than on a standard-width wheel. Start by confirming the 5 on 5 pattern and the 78 center bore on your hub, then check the 4.8 backspacing against brake calipers and suspension travel.
Key features
- Split-spoke design
- Aluminum construction
- 20-inch diameter and 10-inch width
- 5 on 5 bolt pattern with a 78 center bore
- Offset of -18 and backspacing of 4.8
Wide wheels and test fitting
A wide wheel with a strong negative offset moves the face outward and can meet the fender, control arms or brake parts at full lock or full compression. Test-fit before road use by mounting the wheel and turning the steering both ways, then checking the tire against the body and suspension. Look for scuffs and rub marks.
The inner face is worth checking against the brake caliper as well. A wide wheel puts more leverage on the hub, so keep the hardware matched to the seat style, tighten in a star pattern and check torque after the first drive.
- Test-fit with the planned tire
- Turn the steering to both locks
- Check suspension at full compression
- Retorque after the first drive
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | D55820007347 |
| Style | Split spoke |
| Construction | Aluminum |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 78 |
| Offset | -18 |
| Backspacing | 4.8 |
| Finish | Gunmetal (title: matte anthracite) |
| Fitment | Universal fit |
Vehicle fitment
No vehicle year, make or model applies. Match the 5 on 5 bolt pattern, 78 center bore and -18 offset to your vehicle, and measure them against the hub you have before choosing this size.
At 10 inches wide with a -18 offset, contact with fenders or suspension is possible on some vehicles, so test-fit the wheel before road use.
Installation notes
Test-fit with the tires you plan to run and turn the steering to both locks to see what the tire touches. Use lug hardware matched to the wheel’s seat type, and tighten in a star pattern once the wheel sits flat on the hub.
What’s included
Only the wheel is included in this package. Lug nuts and center caps are not covered.
Not included: tires and wheel hardware.









