Overview
The FUEL Off-Road Anza D558 in 17 x 8.5 inches is a split-spoke aluminum wheel, part number D55817858350, with a 6 on 5.5 bolt pattern and 108 center bore. Its positive offset of 6 and backspacing of 5 are the key measurements to compare with your vehicle. FUEL Off-Road classifies it as universal fit, so it is chosen by hub and clearance rather than by a named model.
The finish is matte anthracite, also called gunmetal. A positive offset moves the mounting face toward the vehicle’s centerline compared with a negative-offset wheel, which keeps the wheel closer to the suspension and inner fender. That makes inner clearance the check to make after the bolt pattern.
Key features
- Split-spoke face
- Aluminum build
- 17-inch diameter and 8.5-inch width
- 6 on 5.5 bolt pattern with 108 center bore
- Offset 6 and backspacing 5
Inner clearance and positive offset
A positive offset moves the mounting face toward the centerline, which keeps the wheel tucked closer to the suspension and inner fender. The trade-off is that the brake caliper and inner face have to be checked against the wheel. Measure from the inner barrel to the caliper and the control arm before fitting.
Inner clearance is often the tightest check on a positive-offset wheel, especially with larger brakes or a taller suspension. Brake hoses and wheel speed sensor wires can also sit near the inner edge. Route them away from the wheel and inspect them after the first drive.
- Measure caliper clearance
- Check brake hose and sensor wire position
- Test-fit at full steering lock
- Recheck torque after the first drive
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | D55817858350 |
| Style | Split spoke |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 6 |
| Backspacing | 5 |
| Finish | Gunmetal (title: matte anthracite) |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is the category this wheel falls into, so no particular truck, SUV or model year applies. Choose it by bolt pattern, center bore and offset, and measure those against your own hub before buying.
Positive offset changes inner clearance compared with other offsets, so check it against your own brake calipers, control arms and any inner fender contact.
Installation notes
Confirm the wheel seats flat against the hub, then torque the lug nuts in a crisscross sequence, in stages. The 108 center bore must suit your hub’s pilot: an oversized bore uses hub-centric rings, while an undersized hub cannot take the wheel.
What’s included
The wheel is the only item covered. Tires, lug nuts and center caps are not included.
Not included: tires and lug hardware.









