Overview
The Fox 3.0 Factory Series coilover remote reservoir shock, part number 980-02-168, is a direct replacement shock that Fox describes as a bolt-on upgrade for existing applications. Fox says each application was tested by its engineers to maximize suspension travel and performance on and off the road.
Direct replacement shocks are offered for many applications, from factory height to lifted, so matching the shock to your exact vehicle matters more than the model name.
Key features
- Direct replacement, bolt-on design
- Each application was tested by Fox engineers to maximize travel and performance
- Coilover remote reservoir design
- Offered for many applications, from factory height to lifted
- Part of the Fox 3.0 Factory Series
Matching a replacement shock
A direct replacement shock is meant to fill the spot of the existing unit, so the first job is identifying what you are removing. Note the eye-to-eye length at ride height, the stroke, the mount style and any bushing sizes before ordering. Photos of the old shock’s mounts and a tape measure are often enough to confirm the match.
Coilover remote reservoir designs add a reservoir and hose to the layout, so the reservoir needs a mounting point and room to move. Check that the hose stays clear of the exhaust, tires and steering components through full travel. Upper and lower mounts, bushings and spring seats are often inspected at the same time, since worn parts can change how the new shock loads.
- Measure eye-to-eye length at ride height
- Note mount style and bushing size
- Confirm reservoir clearance and hose route
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-168 |
| UPC | 700007193725 |
| Series | Fox 3.0 Factory Series |
| Type | Coilover remote reservoir |
| Mounting | Bolt-on direct replacement |
Vehicle fitment
Compare your existing shock’s mounting points and dimensions with this part before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a bolt-on direct replacement. Confirm the mounting points match the shock you are removing before installing.
What’s included
Check the package contents against your installation before starting.








