Overview
The Fox Racing Shox 2.0 Performance Series rear reservoir shock, part number 985-24-016, is a rear-position shock with an external reservoir and 9.6 inch travel. It suits 2WD and 4WD applications and measures 24.45 inch extended and 14.85 inch collapsed.
The shock body is metal-impacted aluminum, which Fox says sheds heat more quickly than conventional steel. A floating piston keeps the shock oil apart from the high-pressure nitrogen gas chamber, the design Fox credits for a steady ride on rough terrain.
Key features
- Rear mounting location with an external reservoir
- Aluminum shock body that Fox says dissipates heat efficiently
- Nitrogen gas chamber separated from the oil by a floating piston
- 9.6 inch travel for 2WD and 4WD
- 24.45 inch extended and 14.85 inch collapsed lengths
Rear shock replacement tips
A rear reservoir shock controls body motion when the suspension compresses and rebounds, so a worn unit often shows up as bouncing over washboard or a rear end that feels loose after a bump. The external reservoir gives the oil and gas more room to cool, which helps on long descents and repeated trail sections. Keep it clear of tire contact and exhaust heat when routing the hose.
Before replacing a rear shock, measure the old unit’s eye-to-eye length and stroke, and inspect the bushings and mounts for cracks. Shocks are usually changed in pairs on the same axle so damping stays even from side to side. Look for oil on the body, a dented reservoir, or a shaft that feels rough when pushed by hand. After installation, recheck the mounting nuts after the first few trail runs.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-016 |
| UPC | 70000617866 |
| Series | 2.0 Performance Series reservoir shock |
| Mounting location | Rear |
| Reservoir | External |
| Body material | Metal-impacted aluminum |
| Travel | 9.6 inch |
| Extended length | 24.45 inch |
| Collapsed length | 14.85 inch |
| Drive type | 2WD and 4WD |
| Quantity | Each |
Vehicle fitment
Compare the rear mounting points and lengths with the shock currently installed on your vehicle before ordering.
Confirm your vehicle’s year, make, model and trim before installing, and check the rear mounting points against your current shock.
Installation notes
With an external reservoir, position the reservoir clear of moving suspension parts and heat sources. The gas chamber is pressurized, so keep the shock body intact.
What’s included
One rear shock with an external reservoir, sold as each.
Not included: Check the package contents against your installation before starting.







