Overview
The Fox Racing Shox 980-24-404 is a Fox 2.0 Factory Series smooth body remote reservoir shock with a bushing mount. It measures 22.80 inches extended and 14.30 inches collapsed, and it is sized 2.0 x 8.0. It is a direct replacement shock.
Direct replacement shocks are tested for suspension travel on and off the road, and many applications are covered. Confirm the correct application for your vehicle before ordering.
Key features
- Smooth body design with remote reservoir
- Bushing mount
- Extended length 22.80 in., collapsed length 14.30 in.
- Gas charged
- 2.0 Shock Res series, 2.0 x 8.0 size
Matching length and mount
Overall length is the first measurement to check, because a shock that is too long or too short for its mount will change ride height and can bind as the suspension moves. Measure the extended and collapsed lengths of the shock being replaced and compare them with the replacement before you start the job.
Bushing mounts pivot as the suspension cycles, so the bushings should be undamaged and free of cracks before installation. Replacement hardware is often needed when the mounting holes differ from the original. Check that the bushing sleeves seat fully and that the hardware is tightened to the level the vehicle requires. Recheck the bolts after the first few trail runs.
- Compare extended and collapsed lengths before fitting
- Inspect bushings for cracks or flattening
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-404 |
| UPC | 70000496558 |
| Mount | Bushing |
| Extended length | 22.80 in |
| Collapsed length | 14.30 in |
| Listed size | 2.0 x 8.0 |
| Body style | Smooth body, remote reservoir |
| Hydraulic / gas charged | Gas charged |
Vehicle fitment
Confirm your year, model and trim before ordering. Compare the extended and collapsed lengths with the shock you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the extended and collapsed lengths with the shock being replaced before installation, since a length mismatch can bind the suspension.
What’s included
Check the package contents before installation to confirm whether bushing hardware comes with the shock.









