Overview
The Fox Racing Shox 980-02-035 is a 2.0 Series emulsion shock with a remote reservoir, a 2.0 inch body and 14.0 inch travel. It measures 21.10 inch collapsed and 35.10 inch extended, and its reservoir is 2.0 x 11.00 inch.
Emulsion shocks mix gas into the oil rather than separating the two with a floating piston. Valving is tunable, so damping can be set to suit the terrain and the vehicle.
Key features
- Emulsion design with a remote reservoir
- 14.0 inch travel in a 2.0 inch body
- 5/8 inch shaft diameter
- Black and zinc finish with 1/2 inch bolt or heim mounting
Choosing a remote reservoir setup
A remote reservoir moves oil storage away from the shock body, which gives the oil more room to cool and helps limit heat buildup on long descents or repeated hard use. Routing the reservoir hose is the main planning step. Keep the hose clear of tires, steering components and sharp edges, and allow enough slack for full suspension travel in both directions.
Emulsion shocks suit owners who want steady damping on rough terrain. Because gas is mixed into the oil, the fluid can foam under very high heat, so regular inspection of the seals and reservoir fittings is worthwhile. After hard runs, check the shock body temperature and look for oil weeping around the shaft seal.
- Check reservoir clearance before final tightening
- Inspect hose fittings for seepage after the first trail runs
- Recheck mounting bolts after the first few drives
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-035 |
| UPC | 70000375553 |
| Series | 2.0 Series emulsion with remote reservoir |
| Body diameter | 2.0 inch |
| Travel | 14.0 inch |
| Reservoir size | 2.0 x 11.00 inch |
| Shaft diameter | 5/8 inch |
| Extended length | 35.10 inch |
| Collapsed length | 21.10 inch |
| Finish | Black and zinc |
| Mounting | 1/2 inch bolt or heim |
Vehicle fitment
This is a universal fit design with no year, make, model or trim tied to it. Fit depends on the 21.10 inch collapsed and 35.10 inch extended lengths and the mounting style. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The remote reservoir is a separate part from the shock body, so plan its mounting location before fitting. Check that the length and mounting eyes suit your suspension before installing.
What’s included
One shock with remote reservoir. Check the package contents against your installation before starting, including any springs or mounting hardware you need.







