Overview
Part number 942451 is a 50 Series Delta Flow muffler with a compact exterior case and three chambers. It is designed for passenger cars rather than trucks or SUVs, and it is universal fit.
The muffler centers on a Resonance Tuning Chamber, which the company says reduces interior sound and resonance while holding a moderate exterior tone. Per Flowmaster, the layout matches the performance of its two-chamber models and adds engine efficiency for better power and mileage.
Key features
- Resonance Tuning Chamber for less interior sound
- Three-chamber layout within a compact exterior case
- Moderate exterior tone
- Manufacturer-stated gains in engine efficiency, power and mileage
Passenger car exhaust care
Compact passenger car exhausts sit close to the floor pan and rear suspension, so small changes in muffler size or position can cause rubbing or heat damage. Before fitting a new muffler, check the heat shields, the fuel line routing and the rubber hangers, and replace any that are cracked or worn during the install.
Multi chamber mufflers are often chosen for a quieter ride. Inspect the body for pinholes and rust at the seams, since internal baffles can fail long before the outer shell shows damage. A sudden change in tone or a rattle from inside the body is a common sign of wear.
- Check heat shields and fuel lines
- Replace cracked rubber hangers
- Listen for rattles from inside the body
- Recheck clamps after the first week of driving
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | 942451 |
| UPC | 700042015733 |
| Series | 50 Series Delta Flow |
| Chambers | Three |
| Case | Compact exterior case size |
| Intended vehicles | Passenger cars rather than trucks or SUVs |
Vehicle fitment
Universal fit is listed, so no year, make or model is attached. Since the muffler was designed for passenger cars, measure the pipe and outlet location before purchase.
This is a passenger car muffler, not a truck or SUV unit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit clearance matters on a compact car exhaust, so check the body against the floor pan and rear suspension before cutting. Weld or clamp each joint and recheck the hangers.
What’s included
Clamps and hardware are not part of the package.
Not included: pipe and the connection parts needed to install it.












