Overview
The FlowKooler 1747 is a high flow aluminum water pump for 1987-1990 Jeep Cherokee (XJ) vehicles with the 4.0L six-cylinder engine. It has a 2.31-inch hub height and a 3.30-inch O.D. hub.
FlowKooler says its high flow pumps double flow at low rpm and idle, which it presents as a fix for low-speed heating problems. The impeller is CNC machined aluminum, and the pump is a performance replacement with a natural finish.
Key features
- CNC machined aluminum impeller system with 60% more vane
- Impeller shrouding and reduced casting-to-impeller vane clearances for flow efficiency
- Type II Class II anodized coating, which FlowKooler says protects against electrolysis and corrosion
- Operating range 0-3,000 rpm with a 2 year warranty
Cooling system service
A water pump moves coolant through the engine, radiator and heater core, so its condition affects how evenly the engine warms and cools. When the pump starts to wear, the coolant flow drops, and temperatures may climb under load or at idle before any other symptom appears.
Replacing the pump is a good time to inspect related parts. Check the thermostat, radiator cap and hoses, since a new pump can expose a weak hose or stuck thermostat. Drain and refill the coolant with the correct mix once the new pump is installed, and bleed the system to remove trapped air.
- Inspect the hoses and clamps during the job
- Check the thermostat’s opening behavior before refilling
- Look for leaks at the pump gasket after the first heat cycle
Specifications
| Brand | FlowKooler |
|---|---|
| Part number | 1747 |
| UPC | 70000359055 |
| Engine | 4.0L 6 cylinder |
| Material | Aluminum |
| Finish | Natural |
| Hub height | 2.31-inch |
| Hub outside diameter | 3.30-inch O.D. |
| Type | Performance replacement |
| Fitment type | Direct fit |
| Warranty | 2 year |
| Operating range | 0-3,000 rpm |
Vehicle fitment
The pump fits 1987-1990 Jeep Cherokee (XJ) with the 4.0L six-cylinder, matched by the 2.31-inch hub height and 3.30-inch O.D. hub.
Other Cherokee and Grand Cherokee generations and other engines are outside this fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 2.31-inch hub height and 3.30-inch hub diameter with your existing pump before fitting. Check pulleys, gaskets and belts against your engine before installing.
What’s included
The package is a water pump only.












