Overview
The FlowKooler 1750 is a high flow aluminum water pump for a 4.0L six-cylinder engine, with a natural finish. FlowKooler designs it to double water flow at low rpm and idle, which it says addresses low-speed overheating.
FlowKooler says flow returns to normal at 3,500 rpm to prevent excess flow at high speed. The maker reports independent testing showing 20% more gallons per minute at 2000 rpm and 100% more at 900 rpm than other pumps tested.
Key features
- Doubles water flow at low rpm and idle
- Flow returns to normal at 3,500 rpm
- Aluminum construction in a natural finish
- Reported gains of 20% at 2000 rpm and 100% at 900 rpm
Low speed cooling
Most cooling trouble at low speed comes from the water pump moving less coolant when the engine turns slowly. At idle the radiator fan may be the only airflow through the core, so the coolant has to carry heat away on its own. A pump that moves more coolant at low rpm helps the engine shed heat during slow traffic.
High flow at high speed can also cause issues. Excess flow can reduce the time coolant spends in the radiator, so cooling efficiency may drop. Check the thermostat, radiator and cooling fan along with the pump when diagnosing a heat problem.
- Confirm the radiator fan operates at idle
- Check coolant level and mix before and after the install
- Inspect the pump weep hole for seepage
Specifications
| Brand | FlowKooler |
|---|---|
| Part number | 1750 |
| UPC | 70000466948 |
| Engine | 4.0L six cylinder |
| Material | Aluminum |
| Finish | Natural |
| Type | Performance replacement |
| Fitment type | Direct fit |
| Flow change | Returns to normal at 3,500 rpm |
Vehicle fitment
Confirm your year, make and model before ordering. The 4.0L six-cylinder engine size is the main match point.
Check your engine and mounting face against the pump before ordering, and confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the pump’s mounting face and hub against your engine before fitting, since no hub dimensions are given for this part.
What’s included
The package is a water pump only, without a gasket, pulley or belt.












