Overview
The Omix-ADA 17104.16 is a steel water pump for V8 engines. It fits the 1973–1981 Jeep CJ5, the 1973–1975 CJ6 and the 1976–1981 CJ7. It is a direct-fit OE replacement with a natural finish, identified by part number 17104.16.
CJ owners with a V8 can use the trim list below to check their vehicle. Use it before fitting, since the pump is listed only for those years and models.
Key features
- Steel construction in a natural finish
- Made for V8 engines
- Direct-fit OE replacement type
- It fits the CJ5, CJ6 and CJ7 in several trims.
- Limited five-year warranty from Omix-ADA
Steel pumps on V8 CJs
Steel water pumps are heavier than aluminum units and tolerate high under-hood heat well, which suits V8 CJ engines that run warm in summer traffic. Steel bodies resist deformation from tightened bolts, but they can rust around the mounting face if the cooling system is neglected. Check the pump body and engine face for corrosion before fitting.
The pump shaft and bearing take most of the wear, so check for play and leaks at the weep hole. Replace the belt if it is glazed or cracked, and check the tensioner for smooth movement. Inspect the radiator cap and hoses during the job, since they age on a similar schedule and affect flow through the new pump.
- Mounting face condition
- Shaft and bearing play
- Belt and tensioner
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17104.16 |
| UPC | 804314027131 |
| Engine | V8 |
| Component | Water pump |
| Material | Steel |
| Finish | Natural |
| Fitment | Direct fit |
| Type | OE replacement |
| Warranty | Limited five-year warranty from Omix-ADA |
Vehicle fitment
It fits the 1973–1981 Jeep CJ5 (Base, Golden Eagle, Laredo, Renegade), the 1973–1975 Jeep CJ6 (Base) and the 1976–1981 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Renegade).
Years outside 1973–1981, and models other than the CJ5, CJ6 and CJ7, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The water pump is the product itself. Check the contents and whether a separate gasket is needed before starting the installation.









