Overview
The Firestone Ride-Rite Air Helper Spring 6397 is a double convoluted air helper spring with a 6.6 Inches air bag diameter, part number 6397. It is built for load leveling, and the brand describes its heavy duty air helper spring kits as helpful for keeping a vehicle level.
This spring has a 5 Inches-6.5 Inches installed height and an 8.3 Inches maximum extended and compressed height, with a 1/8 NPT air inlet. Firestone Ride-Rite says its kits provide up to 5000 lbs of leveling capacity.
Key features
- Keeps the vehicle level and helps level off-center loads
- Double convoluted air bag, 6.6 Inches diameter
- Brand lists reduced suspension fatigue and bottoming out
- Air adjustments can improve ride
Thread and mount checks
Air helper springs rely on their mounting studs and blindnuts to carry load, so thread condition matters as much as bag condition. Before installation, clean the threads and check for damage, stripping or corrosion. A thread that looks sound can still fail under load if it is cross threaded, so start each nut by hand and then tighten with a tool to the fastener’s specified value.
Because the top and bottom mounts use different thread sizes, keep the hardware sorted by location. Inspect the mounts after the first few drives, since spring movement can loosen connections. Check the bag for rubbing against the frame or axle, and look for rust on mounting brackets. Replacing damaged hardware is usually simpler than repairing it.
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 6397 |
| UPC | 767555110621 |
| Air bag type | Double Convoluted |
| Air bag diameter | 6.6 Inches |
| Installed height | 5 Inches-6.5 Inches |
| Max extended height | 8.3 Inches |
| Max compressed height | 8.3 Inches |
| Air inlet size | 1/8 NPT |
| Mounting type | (1) 5/8″-18 combo stud top, (1) 3/8″-16 blindnut bottom |
Vehicle fitment
Direct Fit is listed, but no year, make, model or trim is named. No specific vehicle is confirmed for this spring.
Confirm your vehicle’s year, model and trim before ordering. The 5 Inches-6.5 Inches installed height is the measurement to check against your current setup.
Installation notes
The top stud is 5/8″-18 and the bottom blindnut is 3/8″-16, so check that both thread sizes match your mounting hardware before installing.
What’s included
Confirm the package contents, including mounting hardware, before installing.












