Overview
The Firestone Ride-Rite Air Helper Spring 6401 is a double convoluted air helper spring with a 7.5 Inches air bag diameter, part number 6401, for load leveling and ride support. Firestone Ride-Rite describes its heavy duty air helper spring kits as a way to keep a vehicle level, level off-center loads and increase vehicle stability.
The spring has a 6 Inches-7 Inches installed height, a 9 Inches maximum extended height and a 1/4 NPT air inlet. Its heavy duty kits provide up to 5000 lbs of leveling capacity, and it is a direct fit design.
Key features
- Keeps the vehicle level
- Helps level off-center loads and reduces suspension fatigue
- Air adjustments can improve ride quality
- Reduces bottoming out and supports vehicle stability
- Double convoluted air bag with 7.5 Inches diameter
Air pressure and leveling
Air helper springs add support by raising the rear suspension when air pressure rises, which helps the vehicle stay level under a heavy load. Pressure should match the load, and it should be checked regularly with a gauge. Over-inflating an air bag can stress the bag and its mounts, so set pressure with care.
Air helper systems work best when the rest of the suspension is in good shape. Worn shocks, bushings and leaf springs can make a helper spring feel inconsistent, so inspect those parts during installation. Keep the air lines and valve fittings protected from road debris and check for leaks at each service interval.
- Check air pressure with a gauge regularly
- Inspect shocks and bushings during installation
- Protect air lines from road debris
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Part number | 6401 |
| UPC | 767555105955 |
| Air bag type | Double Convoluted |
| Air bag diameter | 7.5 Inches |
| Installed height | 6 Inches-7 Inches |
| Max extended height | 9 Inches |
| Max compressed height | 9 Inches |
| Air inlet size | 1/4 NPT |
| Mounting type | (1) 3/4″-16 combo stud top, (1) 3/8″-16 blindnut bottom |
| Leveling capacity | Up to 5000 lbs |
Vehicle fitment
This air helper spring is a direct fit design, but no year, make, model or trim applies, so confirm fit for your vehicle before installing.
Confirm your vehicle’s year, model and trim before ordering. Compare the 6 Inches-7 Inches installed height and the mounting studs with your vehicle before fitting.
Installation notes
The top mount is a 3/4″-16 combo stud and the bottom is a 3/8″-16 blindnut, so confirm both mounting points line up before installing. Air is supplied through a 1/4 NPT inlet.
What’s included
Confirm what is supplied, including any mounting hardware, before installing.












