Overview
The Fabtech Performance Twin Tube Shock Absorber, part number FTS7119, is a hydraulic twin-tube shock with no reservoir and a 2 inch diameter body. Its listed collapsed length is 16.21 inches, its extended length is 10.68 inches, and its travel length is 5.53 inches.
Fabtech designed the shock to work with its suspension systems for ride control. High flow 9 stage valving and a closed cell foam insert help reduce shock fade at high speeds.
Key features
- High flow 9 stage valving for dampening
- Closed cell foam insert
- 9/16 inch chrome hardened piston rod and 1 3/8 inch OD piston
- Twin-tube hydraulic body with no reservoir
Setting up a twin tube shock
A twin tube shock without a reservoir relies on its own internal layout for damping, so mounting position and stroke matter more than they do on a shock with a remote canister. Before fitting, measure the installed length at both ride height and full droop, then compare that with the shock’s collapsed and extended figures. A shock that bottoms out or runs out of travel can damage its mounts quickly.
Worn eyelets and mount bushings change the angle the shock works at, which can make damping feel uneven even when the shock is sound. Replacing the bushings at the same time as the shock keeps the load path consistent. Grease or inspect any sleeves on the mount hardware, and check the piston rod for pitting or bent sections, since debris can scratch the seal.
- Measure installed length at ride height and at full droop
- Inspect mount bushings and sleeves before reuse
- Check the piston rod for pitting or damage
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7119 |
| UPC | 674866015753 |
| Shock body | 2 inch diameter twin tube hydraulic |
| Collapsed length | 16.21 in |
| Extended length | 10.68 in |
| Travel length | 5.53 in |
| Lower mount | S1 |
| Upper mount | EB1 |
| Reservoir | No |
| Finish | White powdercoat with blue Fabtech logo |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
Vehicle fitment
Compare the collapsed, extended and travel lengths and the S1 and EB1 mount codes with your vehicle’s measurements before selecting it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lower mount S1 and upper mount EB1 are the mount codes given, so match them to the existing mounts before installation. Collapsed and extended lengths should clear your suspension at both ends of travel.
What’s included
This package is the shock unit only.
Not included: Check the mounting hardware against your installation before starting.









