Overview
The Fabtech FTS8013 is a performance steering stabilizer with loop mounts at both ends, measuring 23.95 inches extended and 14.42 inches compressed. The manufacturer fitment list names the 1999–2006 Chevrolet Silverado 1500 and the 1999–2006 GMC Sierra 1500.
The FTS8013 is built with the same construction as Fabtech’s Performance Shocks and is intended to reduce bump steer and wheel shimmy that can appear with oversized aftermarket wheels and tires. It has a 2 inch body diameter and 9.53 inches of travel.
Key features
- Loop top and lower mounting
- 2 inch body diameter
- 9.53 inch travel
- Same construction as Fabtech Performance Shocks
- Single configuration, direct fit type
- White finish
Working with loop mounts
Loop mounts pivot as the steering linkage moves, which lets the stabilizer work through its travel without binding. The bushings inside each loop carry the load and wear over time. A worn bushing can cause a loose feel at the wheel or a knock over bumps, so inspect them during routine service.
Steering stabilizers protect the linkage from sudden side-to-side forces, but they cannot make up for worn tie rod ends, ball joints or wheel bearings. When replacing a stabilizer, check those parts as well. Keep a record of the bolt torque you use and recheck it after the first few drives. A consistent steering feel afterward is a good sign the install went well.
- Inspect loop bushings during tire rotations
- Check tie rod ends for play
- Recheck fasteners after early drives
- Verify alignment after changes
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS8013 |
| UPC | 674866012950 |
| Type | Stabilizer only |
| Configuration | Single |
| Fitment type | Direct fit |
| Extended length | 23.95 inch |
| Compressed length | 14.42 inch |
| Travel | 9.53 inch |
| Top mounting | Loop |
| Lower mounting | Loop |
| Body diameter | 2 inch |
| Finish | White |
| Shock boot | Not included |
| Brackets | Not included |
Vehicle fitment
The manufacturer fitment list names two vehicles for the FTS8013: the 1999–2006 Chevrolet Silverado 1500 and the 1999–2006 GMC Sierra 1500. Listed trims are Base, LS, LT and WT for the Silverado 1500, and Base, HT, SL, SLE, SLT and WT for the Sierra 1500.
The list does not cover Silverado or Sierra 2500 and 3500 models, or any model years outside 1999–2006. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets are not included, so the loop ends will need compatible mounting hardware before the stabilizer can be fitted. Steering stabilizers connect to the steering linkage, so have a qualified technician install it and check the steering afterward.
What’s included
Stabilizer unit only, with loop ends at both mounting points, in white.
Not included: brackets and shock boot.













