Overview
The Fabtech FTS8000 is a dual steering stabilizer complete kit for the 2000–2004 Ford Excursion and the 1999–2004 Ford F-250 and F-350 Super Duty trucks. Its dual configuration and complete-kit type set it up as one package with its mounting brackets.
The stabilizer is built with the same construction as Fabtech’s Performance Shocks. It is designed to address bump steer and the shimmy that larger aftermarket wheels and tires can cause. The brackets come with the kit.
Key features
- Dual configuration
- Complete kit type
- Brackets included
- Built on Performance Shock construction
- Intended to address bump steer and wheel shimmy
Dual stabilizer setups
A dual stabilizer uses two damping units across the steering linkage, which spreads the load across the setup. On heavier Super Duty trucks with larger tires, that layout suits the added forces better than a single unit. A complete kit also means both sides and their brackets are matched, which simplifies the installation.
Before fitting, compare the new brackets with the mounts already on the truck and inspect the existing hardware. Both units should be fitted evenly so the steering stays balanced from side to side. Inspect the bushings and brackets for cracks after the first drives, since mounts take repeated loads from the steering.
- Match both units to the same mount points
- Check brackets for cracks or bends
- Inspect the bushings and loops for wear
- Decide whether a shock boot is needed for your setup
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS8000 |
| UPC | 674866007079 |
| Configuration | Dual |
| Kit type | Complete kit |
| Extended length | 23.95 in |
| Compressed length | 14.42 in |
| Travel | 9.53 in |
| Top mounting | Loop |
| Lower mounting | Loop |
| Body diameter | 2 in |
| Finish | White |
| Brackets | Included |
| Shock boot | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2000–2004 Ford Excursion (Eddie Bauer, Limited, XLS and XLT trims) and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims).
The list does not include the 2005 and later Super Duty models or the F-150. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are included, so the kit can be compared directly with the mounts on your truck before the original stabilizer is removed.
What’s included
Dual stabilizers with brackets, supplied as a complete kit.
Not included: Shock boot.










