Overview
The Fabtech lower bearing kit, part number FABFTS1125, is a lower bearing kit. It is also known as FTS1125.
No suspension component, vehicle or bearing size is named, so compare the kit with the bearings it replaces before ordering.
Checking bearing wear
Lower bearings in suspension joints carry load while the component moves, so wear often shows up as play, clunking over bumps or steering that feels loose. Before removing anything, lift the vehicle safely and check for movement at the joint. Look for dry or cracked seals, rust around the housing and visible grease loss, since any of these can point to a worn bearing that should be replaced.
When replacing bearings, match the new kit to the old parts by measuring the bore, the outside diameter and the overall height. Confirm the year, model and trim before ordering, and keep the old bearings for comparison. Press-in bearings need a clean bore and the right tool, and grease should be applied as the guidance for your component calls for. After installation, check that the joint moves freely and that nothing binds through its full range.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS1125 |
| Product type | Lower bearing kit |
Vehicle fitment
Check fit against your vehicle’s year, model and trim before ordering. Compare the kit with the bearings you are replacing.
What’s included
Check the package contents against your installation before starting.









