Overview
The Fabtech FTS26082 is a rear block kit for a 6 inch lift. It is designed for part numbers K7059M, K7060DL and K7061DL, and other parts are needed to complete the set.
Key features
- Rear block kit
- Designed for a 6 inch lift
- Compatible with part numbers K7059M, K7060DL and K7061DL
- Additional parts needed for a complete set
Building a complete rear set
A rear block kit works best when every piece of the set is present and matched. Missing a bracket, extension or bump stop component can leave the rear end sitting unevenly or binding at full compression. Lay out the parts before starting and check each one against the compatible part numbers so nothing is missed halfway through the job.
After installation, measure the rear ride height on both sides and check the shocks for full travel without bottoming. Look for interference between the blocks and the brake lines or spring perches. Recheck fasteners after the first few drives and inspect the bump stops for wear.
- Lay out all parts before starting
- Measure ride height on both sides
- Check shock travel and bump stop contact
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS26082 |
| UPC | 674866106086 |
| Position | Rear |
| Lift | 6 inches |
| Compatible part numbers | K7059M, K7060DL, K7061DL |
Vehicle fitment
Match the kit to your vehicle’s year, model and trim, and to the compatible part numbers above, before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Other parts are required to complete the set and are not part of this kit.
Not included: Other parts are needed to complete the set, so gather them before starting the installation.







