Overview
The Fabtech FTS22103 is a block and U-bolt kit that provides 5.5 inches of lift through two suspension lift blocks. The kit includes four U-bolts, eight nylock tall nuts and eight thick flat washers, so the hardware for mounting the blocks comes in one box.
Lift blocks are spacers that raise the body by sitting between the axle and the springs. This kit is labeled universal fit, so confirm that it suits your truck before ordering.
Key features
- Two lift blocks providing 5.5 inches of lift, marked as up
- Four U-bolts for mounting
- Eight nylock tall nuts
- Eight thick flat washers
- Listed by Fabtech as universal fit
Installing and checking the lift
A block kit works by raising the axle, which changes the angle of the driveshaft and the geometry of the suspension. Before installing, inspect the springs, axle seats and U-bolts for wear, and make sure the parts are clean. Mount the blocks with the proper orientation and tighten the hardware evenly so the block sits flush against the axle.
After installation, have the alignment and driveline angles checked, and take a short test drive to listen for vibration or steering changes. Inspect the blocks and hardware after the first week of use and periodically afterward, looking for cracks, loose nuts or bent U-bolts. Work on a level surface and use jack stands throughout the job.
- Clean axle seats before mounting
- Tighten hardware evenly
- Check alignment and driveline angles
- Inspect U-bolts for loose or bent threads
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22103 |
| UPC | 674866020719 |
| Lift height | 5.5 inches (up) |
| Components | Two lift blocks |
| Included hardware | Four U-bolts, eight nylock tall nuts, eight thick flat washers |
| Fitment | Universal fit |
Vehicle fitment
The kit is labeled universal fit, so it is not tied to a particular year, make or model. Confirm the match against your axle and spring type before buying.
Confirm your vehicle’s year, model and trim before ordering, and check the axle and spring type against the kit.
Installation notes
Fitting a 5.5 inch lift changes suspension geometry, so have the alignment and driveline angles checked afterward. Use the included U-bolts, nylock nuts and washers together, and work under a raised vehicle only on stable jack stands.
What’s included
Two lift blocks, four U-bolts, eight nylock tall nuts and eight thick flat washers.







