Overview
The Fabtech FTL5212 is a 1.5-inch front leveling kit for the 2021–2026 Ford Bronco, in the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims. It uses CNC machined aluminum billet spacers that fit on top of the factory coilover shock assemblies, which Fabtech says keeps the Bronco’s ride and adds front height for larger tires.
The spacers bolt in without disassembling the factory coilovers, which keeps the install quick. They are designed to sit at the maximum height possible without ball joint or tie rod bind through the full range of suspension travel. The kit is a 4WD leveling kit, so the factory coilover shocks stay on the truck and no spring compression is needed. The spacers are aircraft grade billet aluminum with CNC machining and work with the factory coilovers while keeping the Bronco’s smooth ride. The kit comes with high grade hardware. Some models may not sit level after installation, so check the stance once the work is done.
Key features
- 1.5 inches of front lift
- CNC machined aircraft grade billet aluminum spacers
- Installs on top of the coilovers without disassembly
- Designed to avoid ball joint, tie rod and steering bind
- Keeps the factory ride
Tire size and trimming
Leveling spacers raise the front, which changes how the tires sit in the wheel well. A larger tire adds rotational mass and changes the effective gearing, so the speedometer and driveline should be considered. Fender liners and the inner edge of the tire often need checking after the first drive, especially at full steering lock.
Ball joints, tie rod ends and steering components are loaded differently at a new height. Look for binding through the full range of steering and suspension travel, and inspect the joints after the first off-road outing. Spacer hardware should also be checked, since fasteners can loosen when the suspension works hard.
- Recheck fender liner clearance after the first drive
- Inspect ball joints after off-road use
- Confirm steering turns without binding
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTL5212 |
| Type | Front leveling kit with strut spacers |
| Position | Front |
| Front lift | 1.5 inches |
| Front lift method | Spacers on top of coilover shocks |
| Spacer material | Aluminum |
| Finish | Unfinished |
| Track bar drop | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2021–2026 Ford Bronco, including the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
The list does not cover the Bronco from 2020 or 2023 onward, or the Bronco Sport. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some Broncos may not sit level after installation. Tire sizes 35/12.50R18 or 35/12.50R20 may need minor trimming and 5 3/4-inch backspacing. Check the level and alignment after installation.
What’s included
Aluminum billet front spacers and high grade hardware.










