Overview
The Vengeance Series Front Bumper in black powder coat, part number CS16-D3851-1, is a lightweight 11 gauge steel front bumper for the 2016–2018 Chevrolet Silverado 1500. It is a sensor bumper, and the Vengeance Series is available with no guard or with a pre-runner guard.
The bumper has a center cutout for a 20 inch LED light bar and mounting points on each side for two small LED lights. Its high and tight fit follows the contours of the vehicle, and a lower cutout improves airflow. It is premium steel, engineered to be lightweight, with a sleek finish and an aggressive look on and off the road.
Key features
- Vengeance Series lightweight front bumper
- High and tight fit to the contours of the vehicle
- Lightweight: 65 lbs with no guard, 75 lbs with pre-runner guard.
- Center cutout for a Rigid Industries 20 inch LED light bar, not included
- Side mounts for two 2×2 Dually lights each, not included
- Lower cutout for maximum airflow
- Complete bolt-on bumper with brackets that tie directly to the frame
- 11 ga. U.S. steel with a two-stage black powder coat
Keeping the finish intact
Black powder coat on a lightweight steel bumper meets gravel and road salt along the lower edge, where most chips appear. Wash the lower section after winter driving, and dry the joints where the brackets meet the frame to slow corrosion.
Clean the sensor area gently with a soft cloth and mild soap, because grit can scratch the lens or sensor face. Avoid high-pressure spray aimed directly at connectors. Inspect the frame brackets periodically for loose fasteners, especially after rough roads or heavy towing.
If you later add light bars or auxiliary lighting, plan the brackets and weatherproof connectors before drilling anything. Small chips can be touched up with matching paint before rust starts, and keeping the cutouts free of mud helps the lower airflow opening work as designed.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CS16-D3851-1 |
| UPC | 5810111694 |
| Product type | Vengeance Series front bumper |
| Position | Front |
| Width | Full |
| Material | 11 ga. U.S. steel |
| Finish | Two-stage black powder coat |
| 65 lbs no guard, 75 lbs pre-runner guard | 65 lbs no guard, 75 lbs pre-runner guard |
| Light mounts | Included |
| Winch mount | Not included |
| D-ring mount | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2016–2018 Chevrolet Silverado 1500.
Other Silverado 1500 years and the heavy duty models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper bolts on with the brackets provided, which tie directly to the frame. It is a sensor bumper, so check the sensor positions against your truck when fitting it.
What’s included
The bumper with its frame brackets and light mounts.
Not included: The LED light bar and the 2×2 Dually lights.












