Overview
The TeraFlex D-Ring Mount, part number 4803300, is a bare steel D-ring mount for the front of the Jeep Wrangler (JK), in 2-door and 4-door models. TeraFlex designed it to fit the frame holes on the front of the JK frame, and it can be added to the outside of many aftermarket bumpers for the front of the JK.
The mount fits 2007–2015 Jeep Wrangler (JK) models, including 2-door and Unlimited 4-door versions. It attaches to the existing frame holes, so no drilling is needed on JK applications.
Key features
- Designed for the frame holes on the front of the JK frame
- Can be added to the outside of many aftermarket bumpers
- Fits 2-door and 4-door JK models
- No drilling required for JK applications
Recovery points and D-ring use
A D-ring mount is only one part of a recovery point. The shackle, the strap and the bumper all have to be rated for the load, and the mount has to be secured to a structure that can take the force of a pull. Pulling from the front frame and bumper rather than from a tow hook or a single bolt spreads the load across more of the vehicle. Keep pulls in line with the mount so the shackle does not load sideways.
Bare steel mounts can rust where paint has been removed during fitting. Clean and prime any bare areas after installation, and check the frame holes and welds for cracks after heavy use. Because the mount is added to the outside of the bumper, the bumper itself should be inspected for fatigue around the mounting points, especially after rock crawling or hard recovery work.
- Use rated shackles and recovery straps
- Inspect the mount for cracks after heavy recovery
- Touch up bare steel to prevent rust
- Keep the strap in line with the mount
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4803300 |
| UPC | 843885026136 |
| Position | Front, frame mount |
| Material | Steel |
| Finish | Bare steel |
| Drilling | Not required for JK applications |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2015 Jeep Wrangler (JK), in 2-door and Unlimited 4-door models.
The list does not include the 2016–2018 Wrangler JK or any Wrangler JL, TJ or LJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
TeraFlex says no drilling is required for JK applications, because the mount fits the frame holes on the front of the frame. It is added to the outside of the bumper, so the bumper must have a place for the mount to attach.
What’s included
One bare steel D-ring mount. Shackles, bolts and a bumper are not included.









