Overview
The Fab Fours Front Fender Flare, part number JK1003-1, is a high arch front flare for 2-door and 4-door models. The arch design allows for bigger tire size and gives greater tire clearance, and Fab Fours built it with ease of installation and modularity in mind.
The flare is CNC laser cut and brake formed from 16-gauge steel and finished in 2-stage matte black powder coat. It bolts directly to the Fab Fours base fender, part J1000, with the stainless steel hardware supplied. The flare accommodates an LED parking and turn lamp mounted in the base fender. No drilling is required.
Key features
- High arch design for bigger tire sizes
- Greater tire clearance
- 16-gauge steel, CNC laser cut and brake formed
- 2-stage matte black powder coat
- Fits over the base fender with an LED parking and turn lamp
- Stainless steel hardware
- Made in the USA
Front fender and lamp care
A front flare sits over the tire and the base fender, so its edges see spray, mud, and rock strikes on most trail drives. Keeping the lamp housing sealed and the wiring secure matters because water is the most common cause of lamp failure. Check the lamp’s connector after each wash or water crossing and dry any moisture before it can corrode the contacts.
Steering and suspension movement can push tires toward the flare at full lock or compression, so check clearance after mounting and after any change in tire size. Inspect the powder coat along the upper edge and at mounting points, and touch up chips before rust spreads under the finish. Re-check the stainless hardware periodically. When replacing a lamp later, use the same seal style to keep moisture out of the housing.
- Check lamp connectors after water crossings
- Confirm tire clearance at full lock
- Touch up chips on the upper edge
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK1003-1 |
| UPC | 5810113834 |
| Position | Front |
| Body style | 2-door and 4-door models |
| Material | 16-gauge steel |
| Finish | 2-stage matte black powder coat |
| Mounting hardware | Stainless steel |
| Weight | 40 lb |
| Height | 29 inches |
| Width | 22 inches |
| Length | 70 inches |
| Quantity | Pair |
| Installation | No drilling required |
Vehicle fitment
The flare is for 2-door and 4-door models and attaches to the Fab Fours base fender. Check the year and the base fender before ordering.
Because the flare mounts to the base fender, match it to the base fender system for your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No drilling is needed. The flare bolts to the base fender using the stainless steel hardware, and it accommodates an LED parking and turn lamp from the base fender, so the lamp can stay in place.
What’s included
A pair of front fender flares with stainless steel hardware.




























