Overview
The Fab Fours Base Open Fender Base System without Flare, part number TF4100-B, is a front open fender kit in 11 ga. U.S. steel for the 2017-2018 Ford F-250 and F-350 Super Duty. It comes in bare steel.
The system runs 40 inch tires with only a leveling kit, keeps the center of gravity low and gives an aggressive stance. The modular design runs with or without optional fender flares, and the kit includes the inner fender.
Key features
- Open fender system for the front, in bare steel
- 11 ga. U.S. steel construction, made in the USA
- It allows 40 inch tires with only a leveling kit.
- Provides greater tire clearance and keeps geometry low and wide
- Includes the inner fender
- Modular design: run it with or without optional fender flares
- Kit includes templates, adhesives, epoxy and drill bits
- Installation manual and video included; professional installation recommended
Open fender tire clearance
Open fenders leave the tire and suspension more exposed, so clearance is checked at both full steering lock and full suspension compression. A kit that runs with or without optional flares gives the owner a choice of looks and coverage, but the tire size, wheel offset and suspension height all affect the final fit. Test the clearance before driving on the road.
Tire changes often affect alignment and steering geometry. Owners running larger tires usually check toe, caster and the steering stops after the install, and look for rubbing on the inner fender and fender edge. Keep the bare steel edges clean and touch them up if they start to rust, since open fenders collect mud and road spray.
- Check clearance at full lock and full compression
- Inspect bare steel edges for rust each season
- Re-check fender hardware after the first drives
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | TF4100-B |
| UPC | 5810115647 |
| Product type | Open fender base system (without flare) |
| Position | Front |
| Material | 11 ga. U.S. steel |
| Finish | Bare steel |
| Inner fender | Included |
| Origin (per manufacturer) | 100% made in the USA |
| Installation aids | Templates, adhesives, epoxy, drill bits, manual and video |
| Fitment type | Direct fit |
Measure the installation area and confirm clearance for your build before ordering.
Vehicle fitment
The manufacturer fitment list for the Fab Fours TF4100-B covers:
- 2017–2018 Ford F-250 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT)
- 2017–2018 Ford F-350 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT)
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
- Follow the included installation steps and torque every fastener to the specified value.
- Check clearance around doors, tailgates, tires and moving parts before driving.
- Re-check all hardware after the first miles of driving.
What’s included
The kit includes everything needed to complete the installation: templates, adhesives, epoxy, drill bits, the inner fender, and an installation manual and video.
Not included: Optional fender flares, which can be added separately.






















