Overview
The Crown Automotive exhaust valve guide, part number 119137, is 3 in. long and filed under performance parts. Valve guides are the sleeves that position the valve stem in the cylinder head, and this part is sold under the Crown Automotive brand. Material, finish and engine application are not known, so verify them before use.
Valve guide wear and clearance
The valve guide controls where the valve stem travels, so wear in the guide lets the valve tilt slightly and seat unevenly. Over time that can allow oil to pass down the stem into the combustion chamber, and it can also shorten the life of the valve seat. Worn guides are often first noticed as blue smoke on startup or as oil use between changes.
Replacing a guide is a machining job rather than a simple swap. The old guide is driven out, the bore is checked, and the new guide is pressed in to the correct height, usually with the head warmed for the fit. Once installed, the guide is reamed to size so the valve moves freely, and the valve and seat are usually checked at the same time.
- Check stem-to-guide clearance with a dial gauge
- Inspect the valve seat when the guide is replaced
- Confirm the guide height before reaming
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 119137 |
| UPC | 848399051469 |
| Length | 3 in. |
Vehicle fitment
No vehicle fitment is known for this part. Match the part to the engine and cylinder head before installing it.
Confirm your vehicle’s year, model and trim before ordering.









