Overview
The Crown Automotive camshaft bearing set, part number J4486286, contains 5 camshaft bearings for AMC 304-401 V8 engines. It fits older Jeep models from 1971 to 1991, including Cherokee and Wagoneer SJ, CJ5, CJ6, CJ7, Commando, Grand Wagoneer and J-series trucks.
Camshaft bearings are normally replaced during an engine rebuild, so this set belongs in a rebuild rather than a quick repair.
Key features
- Set of 5 camshaft bearings
- Made for AMC 304-401 V8 engines
- Crown Automotive part number J4486286, UPC 848399062441
- Trims include Golden Eagle, Laredo and Renegade on CJ5 and CJ7 models
Rebuild planning
Camshaft bearings carry the cam in its bores, so their condition affects valve timing and oil flow. During a rebuild, the old bearings are removed and the bores are checked for wear, roundness and alignment. Fitting new bearings into a worn bore can lead to early failure, so measure the bores before ordering parts.
Bearing clearance matters, and the engine should be assembled with clean oil passages and a correctly fitted cam. Plan the job with a machine shop, since boring and honing need tools most home garages lack. Keep the new bearings in their packaging until installation, and lubricate them with fresh engine oil before fitting the cam.
- Measure the bores before ordering
- Keep oil passages clean and clear
- Lubricate bearings with fresh engine oil
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J4486286 |
| UPC | 848399062441 |
| Quantity | Set of 5 bearings |
| Engine | AMC 304-401 V8 |
Vehicle fitment
It fits 1974–1983 Cherokee SJ, 1971–1975 CJ6, 1971–1981 CJ5, 1976–1981 CJ7, 1972–1973 Commando, 1984–1991 Grand Wagoneer SJ, 1972–1983 Wagoneer SJ, 1974–1988 J10 and J20, and several 1971–1973 J-series trucks, including J-100, J-2500, J-2600, J-4500, J-4600, J-4700 and J-4800.
Later XJ, YJ and TJ models are not on this list, and neither is the Wrangler JK. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Camshaft bearings are normally replaced during an engine rebuild, when the camshaft is removed and the bores are measured. Plan for a machine shop or an experienced engine builder to do the work.
What’s included
The set contains 5 camshaft bearings only. The camshaft, lifters and gaskets are not included.
Not included: The set contains 5 camshaft bearings.









