Overview
The Energy Suspension 5.5174R is a front sway bar bushing set for a 32 mm sway bar, made of red performance polyurethane. It fits the 2006–2008 Dodge Ram 1500 and the 2003–2009 Dodge Ram 2500 and 3500 trucks.
The set includes sway bar end link bushings. HYPER-FLEX polyurethane is designed to last longer than O.E.M. rubber bushings and to give a firmer sway bar response.
Key features
- Front position
- 32 mm sway bar diameter
- Includes sway bar end link bushings
- Performance polyurethane construction
Measuring before you buy
The bar diameter is the first thing to confirm with this kit. Measure the existing bar with a caliper across the bushing area rather than relying on memory or a general size guide. A bar that is even slightly off will not seat the bushings properly, and the bushings will wear unevenly or squeak once in service.
End link bushings deserve the same attention. Inspect the links for play, cracked boots or bent ends before reusing them, since new bushings cannot correct a worn link. Replace the bushings in matched pairs on each side so the bar stays balanced, and torque the mounting hardware once the truck is back on the ground.
- Measure the bar with a caliper before ordering
- Inspect end links for play and bent ends
- Replace bushings in matched pairs
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 5.5174R |
| UPC | 703639989257 |
| Product type | Sway bar bushing set |
| Sway bar diameter | 32 mm |
| Material | Performance polyurethane (HYPER-FLEX) |
| Color | Red |
| Position | Front |
| Included | Sway bar end link bushings |
Vehicle fitment
It fits the 2006–2008 Dodge Ram 1500 (Laramie, SLT and SXT trims), the 2003–2009 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT, Sport and TRX4 trims) and the 2003–2009 Dodge Ram 3500 (Laramie, SLT, ST, SXT, Sport and TRX4 trims).
Chevrolet, GMC and other Dodge models, and years outside these ranges, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your sway bar diameter before fitting, since this set is made for a 32 mm bar. The set includes end link bushings, so replace them at the same time as the main bushings. Support the front end securely while working on the bar.









