Overview
The Edelbrock Performance Valve Springs, part number 5832, are valve springs for AMC 290-401 V8 engines. Edelbrock describes them as upgraded valve springs for an upgraded cam and high RPM use.
Check the engine family and camshaft lift before fitting these springs, since the spring pressure should suit the cam.
Key features
- Upgraded valve spring design
- Intended for an upgraded cam
- Intended for high RPM use
- Applies to AMC 290-401 V8 engines
Springs for high RPM use
Higher engine speeds put more demand on the valvetrain, and the valve spring must keep the valve closed as the cam and lifters push harder. When a spring cannot control the valve, valve float can occur, reducing power and risking contact with the piston. Matching the spring to the cam is the main job when upgrading.
Valve springs are usually changed alongside the cam, lifters and sometimes retainers, so the whole system is matched. When the head is apart, check coil bind clearance and seat height, and inspect the valves and guides for wear. Springs that are too stiff for the cam can overload the lobes.
- Confirm the cam lift before selecting springs
- Replace retainers and locks if worn
- Check coil bind clearance after installation
Specifications
| Brand | Edelbrock |
|---|---|
| Part number | 5832 |
| UPC | 85347058327 |
| Application | AMC 290-401 V8 engines |
Vehicle fitment
This spring is for AMC 290-401 V8 engines. Confirm your engine matches that family before ordering.
Confirm your vehicle’s year, model and trim before ordering, and confirm your engine matches AMC 290-401 V8.
What’s included
The valve springs are the item supplied. Check the package contents against your installation for retainers and caps before starting.









