Overview
The Rigid Industries E-Series 60 Deg. Diffusion LED Light, part number 106513, is a 6 inch rectangular LED light bar with a 60 degree diffused beam and a clear lens. It is sold as a single unit and can be fitted with a bracket or on a surface.
The E-Series is one of Rigid’s versatile lighting lines, and the diffused pattern is one of the beam options it offers. Rigid’s copy places the line in off-road, power sports, marine, general automotive and first responder use. This model is universal fit, so the vehicle match depends on the mounting position and wiring you choose.
Key features
- 60 degree diffused beam that spreads light widely
- 6 inch rectangular light bar
- LED bulb type with a clear lens
- Bracket or surface mounting options
- Diffused sits alongside Spot, Flood, Driving and Hyperspot beams and combination options in the E-Series line
- Universal fit, not limited to a model year
Diffused light around the vehicle
A 60 degree diffused beam is best for lighting an area rather than a distant target. It works well for the rear of a vehicle, a campsite or a trailer hitch, where you need even coverage at short range. The wide spread means the bar does not need precise aim to be useful, though placing it low and angled slightly down keeps the light on the ground where it helps most.
Surface and bracket mounts both need a firm base and a route for the cable that stays clear of moving parts. Check the bracket or surface fasteners after the first few trips, especially on rough roads. A clean lens keeps the spread even, so wipe off mud and salt when you rinse the vehicle.
- Place low and angle slightly down
- Check fasteners after early trips
- Wipe the lens after mud or salt exposure
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 106513 |
| UPC | 849774028915 |
| Product type | Light bar |
| Beam | 60 degree diffused |
| Light shape | Rectangular |
| Bulb type | LED |
| Lens color | Clear |
| Mounting type | Bracket or surface |
| Size | 6 inch |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
This diffused bar is not vehicle-specific. Pick a mounting spot with room for the bracket or surface mount and a clean path for the wire, then check the wide pattern against the area you want lit.
No vehicle is named for this part, so no year, make or model is matched to it.
Installation notes
Power the light through a switch and a fused relay. Confirm the mounting hardware in the box before drilling. Check local rules for auxiliary lights before road use.
What’s included
One 6 inch E-Series 60 Deg. Diffusion LED light bar, sold as a single unit.
Not included: no wiring, switch, fuse or relay is named with this bar.









