Overview
The Rigid Industries D-Series Dually D2 is a driving LED light built in a small 3 in x 3 in cube. It is sold as a set of 2 and is not vehicle-specific, so it works for any driving or auxiliary lighting project that has room for a surface mount.
The D2 produces either 1568 or 3096 lumens and gives a large amount of light in a compact package. It has more cooling surface than equivalent-sized lights, and each light uses 6 white LEDs.
Key features
- Small 3 in x 3 in cube housing
- Output of either 1568 or 3096 lumens.
- 6 white LEDs per light
- More cooling surface than equivalent-sized lights.
- Surface mount with a bracket kit
Layout and wiring for a pair
Two lights set side by side need matching mounts so their beams line up. Place the brackets so each light sees the same stretch of road, and keep both clear of the grille, winch and any recovery gear. Mark the bracket holes before drilling so the pair sits level.
A pair of cube lights draws more current than a single light, so the shared switch, relay and fuse should be sized for the full load. Run each light from the same relay and keep the wire runs equal in length if possible. Good grounding helps both lights run with steady output.
Surface-mount lights take road spray and vibration, so check the bracket bolts after the first few drives. Wipe the clear lens to keep the output even, and inspect the cube housings for cracks after impacts with branches or gravel.
- Mark bracket holes before drilling
- Use one relay and fuse for the pair
- Check bolts and lenses after rough drives
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774027109 |
| Light type | LED |
| Housing | 3 in x 3 in cube |
| Output | 1568 or 3096 lumens |
| LEDs | 6 white per light |
| Lens | Clear |
| Shape | Square |
| Mounting | Bracket kit, surface mount |
| Sold as | Set of 2 |
| Type | Driving |
Vehicle fitment
This driving light is universal and is not made for a specific make, model or year. Check the bracket location and the space for both lights before installing the pair.
Installation notes
Because the D2 is sold as a set of 2, plan both mounting positions before fixing the brackets, and run both lights through a fused relay. Check local rules for driving lights on public roads before use.
What’s included
A set of 2 D2 driving LED lights, with a bracket kit for surface mounting.
Not included: Plan the wiring, switch and relay for the pair before starting.









