Overview
The Rigid Industries Q Series Pro Hyperspot LED Light (Black), part number 544713, is a square LED spot light built around a 5 degree ultra-narrow Hyperspot beam for long-distance lighting. It suits agriculture, fire and rescue, commercial truck, marine, off-road and power sports use, and it is universal fit, so it is not tied to one vehicle.
The Hyperspot optic combines four Dually / D2 optics into one large housing. A patent pending aperture system blocks unused light to keep the beam clean, and the optic is designed to concentrate output. Q-Series covers offer a 50% forward projecting and 50% area light option, so the output can be directed where it is needed.
Key features
- 5 degree ultra-narrow concentrated spot beam for long-distance use
- Patent pending aperture system that blocks unused light
- Four Dually / D2 optics combined in one housing
- Q-Series covers with a 50% forward projecting and 50% area light option
- Vibration isolator and 304 stainless bracket included
- Clear lens, LED bulb type, square light shape
Long-range spot beam use
A narrow spot beam reaches far down a road or trail, but it lights a small area close to the vehicle. Many drivers pair a spot with a wider flood or fog light so the near ground stays visible while the far distance is still lit. Aim the beam at the far point of the trail first, then adjust down so the center hot spot does not blind oncoming traffic.
Aiming is usually done on level ground with the vehicle loaded the way it normally runs. Re-check the aim after changing tires, adding a load or remounting the bracket, since small changes shift a narrow beam a long way. Keep the lens clean, because dirt on a focused optic cuts output more than it does on a wide beam.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 544713 |
| Beam pattern | 5 degree ultra-narrow Hyperspot spot |
| Listed type | Scene/Area Light |
| Bulb type | LED |
| Lens color | Clear |
| Light shape | Square |
| Size | 6.7 Inch |
| Housing height | 6.79 in |
| Housing width | 6.75 in |
| Housing depth | 3.42 in |
| Bracket | 304 stainless steel |
| Included hardware | Vibration isolator and 304 stainless bracket |
| Sold as | Single |
Vehicle fitment
The light is universal fit and is not built for a specific make, model or year. Fit depends on the mounting location and bracket clearance on your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the light through a fuse and relay, as is standard for high-output LED lights. Check your local rules on auxiliary driving lights before mounting it on a road vehicle.
What’s included
One light with a vibration isolator and a 304 stainless bracket.
Not included: A wiring harness or switch is not supplied, so plan for power wiring separately.
















