Overview
The Rigid Industries 250413 is a 50-inch Adapt LED light bar for off-road lighting. It is universal fit, so it is not built for one vehicle. The Adapt is an off-road lighting product that can change instantly with conditions.
The Adapt offers 8 selectable beam patterns, from a 90 degree broad short-distance beam to a highly focused 15 degree long-distance spot, all in a single fixture. It uses no moving parts. Rigid combines LED technology with patented new optics, and Active View Technology lets the beam pattern adjust with vehicle speed. Built-in accent lighting can be set to any color in the light spectrum, including white, for a custom look around town.
The RIGID Dash Controller, a molded backlit unit mounted on the dash, gives easy, intuitive control of the beam patterns, Adaptive Mode, accent lighting and programmable presets. Adapt light bars are available in lengths from 10 inches to 50 inches.
Key features
- Eight selectable beam patterns, from a 90 degree broad beam to a 15 degree spot
- Active View Technology adjusts the beam pattern with vehicle speed
- No moving parts, with LED technology combined with patented new optics
- Built-in accent lighting in any color of the light spectrum, including white
- Base-mounting options in addition to traditional side mounts
- Controlled from the RIGID Dash Controller, a molded backlit dash-mounted unit
Using the Adapt on trail
A light bar with several beam patterns is most useful when the pattern matches the terrain. A wide, short beam helps on tight switchbacks and camp setup, while a narrow, long beam suits open trails and fast roads at night. Changing the pattern before a dark stretch is easier than adjusting it on a rough section.
Mounting height and angle decide how the beam lands. Mount the bar high enough to light the ground ahead without glare, and aim it so the bright center falls on the trail rather than the treetops. Keep the harness routed away from heat and moving parts, and secure it with clips so vibration does not pull on the connectors.
Long light bars take more stress than shorter ones, so check the brackets and fasteners after the first few trail runs. Clean the lens regularly, and look for moisture in the housing or corrosion at the connectors. Protecting the wiring with a fused relay near the battery is a simple step that helps the whole system last.
- Set the beam pattern before entering dark terrain
- Route the harness clear of heat and moving parts
- Recheck brackets after rough trails
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 250413 |
| UPC | 849774031755 |
| Size | 50 inch |
| Length range of the Adapt line | 10 inch to 50 inch |
| Beam patterns | 8 selectable |
| Accent lighting | Any color, including white |
| Bulb type | LED |
| Lens color | Clear |
| Type | Light bar |
| Mounting type | Bracket |
| Quantity | Single |
Vehicle fitment
Rigid lists universal fit for the Adapt, so it is not tied to a specific year, make or model. Confirm that the 50-inch length and the bracket or base mount suit the spot you plan to use on your vehicle before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Adapt includes a wiring harness and an Under Dash Module, so the harness must be routed from the light bar to the dash controller and module. Wire the light bar through a fused relay, and check local road-use rules for auxiliary lights before using it on public roads.
What’s included
Adapt light bars include a RIGID Dash Controller, Under Dash Module, wiring harness and mounting hardware, with the 50-inch light bar.









