Overview
The Edelbrock E-Force Stage-1 Street Systems Supercharger System, part number 15282, is a supercharger kit built around an Eaton Gen VI 1320 TVS rotor assembly. Its output is 317 RW hp and 277 RW ft.-lbs. of torque. The UPC is 85347152827. Fit depends on the vehicle, so check it before ordering.
The compact design fits under a stock hood and installs as a bolt-on kit.
Key features
- Compact design that fits under a stock hood.
- Eaton Gen VI 1320 TVS rotor assembly.
- Self-contained oil system with a 100000 mile service interval.
- Electronic PCM programming module.
- Integrated bypass valve, which Edelbrock says limits the decrease in fuel economy.
- Designed, cast and manufactured in the USA.
Living with a supercharger
A supercharger adds boost, which raises the load on the belts, bearings and fuel system. Once the kit is installed, pay attention to belt tension and pulley alignment after the first drives, since both settle as new parts seat. Fuel quality and cooling also matter more under boost, so keep the cooling system in good order before using the added power regularly.
Oil and service intervals deserve routine checks. A self-contained oil system still needs its level and condition inspected, even when the service interval is long. Watch for seepage around the rotor housing, new whine or belt squeal, and any drop in idle quality, since these can signal a problem that needs attention before it spreads.
- Check belt tension after the first few drives
- Inspect for oil seepage around the supercharger housing
- Keep the fuel system and tune matched to the calibration
- Listen for new whine or belt noise under load
Specifications
| Brand | Edelbrock |
|---|---|
| Part number | 15282 |
| UPC | 85347152827 |
| Supercharger | E-Force Stage-1 Street Systems, Eaton Gen VI 1320 TVS rotor assembly |
| Power | 317 RW hp |
| Torque | 277 RW ft.-lbs. |
| Oil system | Self-contained, 100000 mile service interval |
| Shipping weight | Not part weight; boxed weight not stated here |
Vehicle fitment
Fit depends on the year, model and trim of your vehicle, so verify it before ordering this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bolt-on installation includes an electronic PCM programming module, so calibration comes with the kit. Supercharger installation involves belts and drive components, so follow the instructions supplied with the kit.
What’s included
The kit includes the supercharger, manifold, pulleys, belts, all necessary parts and hardware, and a tuner.









