Overview
The Dynomax Exhaust single system intermediate pipe, part number DYN52355, is a mid-section pipe for an exhaust system. It is designed for building a custom exhaust or for replacing a damaged section of an existing exhaust.
It is universal fit, so the diameter, length and bends must be matched to your vehicle’s exhaust before installing.
Key features
- Single system intermediate pipe
- Designed for custom exhaust fabrication
- Can replace a damaged section of an existing exhaust
- Universal fit
Fabricating a custom pipe section
Working with an intermediate pipe usually means measuring the gap in the existing system, then trimming the new section to fit. Take measurements with the hangers and mounts in place, because the pipe will move slightly when the engine rocks. Dry-fit the section before welding, and check clearance to the floor pan, fuel lines, driveshaft and suspension parts.
Weld joints need clean, bare metal and steady heat, and they should be checked for pinholes after cooling. Stainless and aluminized steel pipes take welds differently, so match your technique to the material you are joining. Exhaust noise changes with pipe length and bends, so review local rules on noise and emissions before finalizing the layout. Support the new section with hangers so it does not sag or rub against the body.
Specifications
| Brand | Dynomax Exhaust |
|---|---|
| Part number | DYN52355 |
| Type | Single system intermediate pipe |
Vehicle fitment
It is universal fit, with no vehicle, year or exhaust system named. The pipe must suit your existing exhaust layout, so check it against your system before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The intermediate pipe is the item supplied. Check fit for your vehicle’s year, model and trim before ordering.
What’s included
Plan for clamps, hangers and gaskets for your installation before fitting the pipe.









