Overview
Part DYN36438 is a band-style steel clamp for joining exhaust sections. The design does not crush the pipe, and it closes the joint with a full 360 degree seal. It is universal fit.
The clamp is built to overlap pipes of different diameters, which is the purpose of its lap-joint design. Grade 8 bolts and pre-attached hardware come with it.
Key features
- Steel band-style construction
- 360 degree sealing joint
- Built to overlap pipes of differing diameters
- Grade 8 bolts with pre-attached hardware
Lap joints and exhaust flow
Exhaust flow depends on how smoothly gas passes through each joint. A lap joint keeps the inner diameter fairly consistent when pipes of slightly different size are overlapped, which reduces the sharp steps that can add restriction. Before cutting anything, dry-fit the sections and check that the overlap is even all the way around, with no pinching or gaps that would stress the band.
Clamps in the middle of a system carry the weight of the pipe and absorb movement from the engine. If the joint sits under heavy load, add or adjust hangers so the clamp is not holding the pipe’s full weight. Watch for shiny rub marks on the pipe where the band or a hanger contacts it, which indicate the joint is moving more than it should. Hot joints also expand, so retighten only after the system has cooled enough to handle comfortably.
Specifications
| Brand | Dynomax Exhaust |
|---|---|
| Part number | DYN36438 |
| Material | Steel |
| Style | Band-style clamp |
| Seal | 360 degree |
| Fasteners | Grade 8 bolts, pre-attached hardware |
Vehicle fitment
Universal fit means no particular vehicle is named for DYN36438. The diameters of the pipes you join determine whether this clamp is the right size.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Pre-attached hardware and Grade 8 bolts.
Not included: the exhaust pipe sections.









