Select your vehicle
-13%

Dynomax Band Clamp – 36437

Dynomax Exhaust

Shop Dynomax Exhaust Clamps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dynomax steel band exhaust clamp, part number DYN36437
  • 360 degree seal, lap-joint design for differing pipe diameters
  • Pre-attached hardware with Grade 8 bolts; universal fit

Description

Overview

The Dynomax band clamp, part number DYN36437, is a steel band-style exhaust clamp for joining two exhaust pipes. It forms a 360 degree seal, and its design will not crush the pipe. It is made as a lap joint for pipes of differing diameters and is universal fit.

The clamp comes with pre-attached hardware and Grade 8 bolts, which Dynomax describes as strong and temperature durable.

Key features

  • Steel band-style construction
  • 360 degree sealing joint
  • Lap-joint design for differing pipe diameters
  • Pre-attached hardware with Grade 8 bolts

Choosing a clamp for pipe diameter

Lap-joint clamps work best when the two pipes overlap by a sensible length and the outer pipe is not badly out of round. Measure the outside diameter of each pipe at the joint, not just the nominal size, because rust and past repairs can change the fit. Position the clamp so the band sits in the middle of the overlap and away from welds, hangers and heat shields that could interfere with it.

Steel clamps are common on mild steel exhausts, but surface rust can keep a band from seating evenly. Clean the pipe where the band will sit and keep oil or grease off the contact area. After tightening, inspect the joint for gaps, and recheck it after the first few heat cycles, since expansion and vibration can ease the band over time. Good preparation at this stage saves a repeat job later.

  • Measure both pipe outside diameters at the joint
  • Keep the band clear of hangers and welds
  • Recheck tension after the first few drives

Specifications

Brand Dynomax Exhaust
Part number DYN36437
Material Steel
Style Band-style clamp
Seal 360 degree
Fasteners Grade 8 bolts, pre-attached hardware

Vehicle fitment

It is universal fit, so no particular vehicle applies. Check the diameters of the two pipes you plan to join before fitting, and confirm the overlap is long enough for a secure lap joint.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Pre-attached hardware and Grade 8 bolts.

Not included: the exhaust pipes being joined.

Questions & Answers

What is the Dynomax DYN36437 used for?

The DYN36437 is a steel band-style exhaust clamp used to join two pipes. It creates a 360 degree seal and is made as a lap joint for pipes of differing diameters.

Does the DYN36437 come with hardware?

Yes. It comes with pre-attached hardware and Grade 8 bolts, which are strong and temperature durable. Check the fasteners against your joint before tightening, since bolt length and count can vary between setups.

Will the DYN36437 fit a specific truck or car?

No vehicle is named for this clamp. It is universal fit, so it is not tied to a make, model or year. Match it to the pipe diameters on your exhaust before installing.

Can a band clamp be reused after removal?

Often yes, if the band is not stretched, cracked or heavily corroded. Inspect the bolts and threads for damage before reuse. Replace any clamp that no longer seats evenly or holds the joint tight, since a worn band is a common cause of exhaust leaks.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dynomax Exhaust Clamps on Amazon