Overview
The Dynomax exhaust bracket, part number DYN36517, is a heavy duty exhaust hanger made from low carbon steel. It holds the exhaust close to the vehicle body and away from obstacles on the trail. It fits the 2007-2015 Jeep Wrangler (JK) in 2-door and Unlimited 4-door models.
Key features
- Low carbon steel construction
- Heavy duty construction for exhaust mounting
- Intended to keep the exhaust tight to the body and clear of off-road obstacles
- Dynomax Exhaust part number DYN36517
Hanger wear and replacement
An exhaust hanger carries the weight of the pipe and muffler and absorbs movement from the engine and drivetrain. Over time the bracket can crack at its bends or pull away from the body, and the pipe may start to sag or rattle against the frame. Off-road use adds stress, since rocks and ruts can twist the system and load the hanger from new angles.
When inspecting the bracket, look for cracks near welds, bent sections and areas where the exhaust has shifted out of its original line. If the hanger is replaced, check that the pipe still clears the body, floor and spare tire carrier. Rubber isolators and clamps often wear at the same time, so inspect them when the bracket is changed.
- Look for cracks near welds and bends
- Check for sagging or contact with the body
- Inspect rubber isolators and clamps
- Confirm pipe clearance after installation
Specifications
| Brand | Dynomax Exhaust |
|---|---|
| Part number | DYN36517 |
| Type | Exhaust bracket (exhaust hanger) |
| Material | Low carbon steel |
Vehicle fitment
It fits the 2007-2015 Jeep Wrangler (JK) in 2-door models (70th Anniversary, Rubicon, Sahara, Sport and X) and Unlimited 4-door models (70th Anniversary, Rubicon, Sahara, Sport, Unlimited X and other trims).
Models outside the 2007-2015 JK years, including the TJ, LJ and JL Wrangler and the Grand Cherokee, are not in the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









